Showing posts with label Arduino. Show all posts
Showing posts with label Arduino. Show all posts

Tuesday, March 25, 2014

MicroView: Chip-sized Arduino with built-in OLED Display!


https://www.kickstarter.com/projects/1516846343/microview-chip-sized-arduino-with-built-in-oled-di

GENERAL SPECS
  • Support for the Arduino™ IDE 1.0+ (OSX/Win/Linux)
  • 100% Arduino™ Compatible
  • Built-in 64x48 OLED display
  • Direct 3.3VDC - 16VDC power input, no power regulator needed
  • Standard DIP Package
  • Breadboard friendly or direct solder
HARDWARE SPECS
  • Display: 64x48 OLED Display
  • Microcontroller: ATmega328P
  • Operating Voltage: 5V
  • Input Voltage: 3.3VDC - 16VDC
  • Digital I/O Pins: 12 (of which 3 provide PWM output)
  • Analog Input Pins: 6
  • Flash Memory: 32 KB
  • SRAM: 2 KB
  • EEPROM: 1 Kilobyte
  • Clock Speed: 16 Mhz
  • No other components required

Sunday, March 25, 2012

Capturing video with an arduino

FromHack-A-Day:



[Carlos Agell] sent in a tip where he captured images from an analog camera with an Arduino.

We’ve seen a few AVR/Arduino hacks that generate video, although overclocking is necessary if you want to do anything beyond a Breakout clone. [Carlos]‘ hack bucks that trend and now he can capture video with an Arduino.

The project captures individual frames from NTSC video at a resolution of 128×96. Although the Arduino isn’t powerful enough for real-time capture, [Carlos] managed this by capturing only thresholds and sending them over to a computer running a program coded in LabVIEW. The PC program reassembles the images of the thresholds and produces a tiny image in 3-bit grayscale.

[Carlos] used the Video Experimenter shield which is impressive in it’s own right. The Video Experimenter is able to do object tracking and edge detection, so we’re wondering when we’ll see robots with computer vision running off an Arduino. Check out a demo of the nootropic design video experimenter shield after the break.

UPDATE: Carlos wrote a sketch in Processing that does the same thing as his LabVIEW program.

Tuesday, October 18, 2011

Microtouch: 8-bit Open Source Media Device

 Atmega32u4 microcontroller and a touch-sensitive LCD screen

From Slashdot:

"The Microtouch is a mobile media device that aims to become an open-source alternative to the iPod Touch."Deeper investigation reveals that the Microtouch is a nifty little device. Powered by an 8-bit microcontroller with only 2.5K of RAM there is an example ebook reader application. A primitive application framework (for some definition of the phrase) is available as Free Software, and for the hardware hackers the EagleCAD PCB files are published under a CC attribution-share-alike license.



Tuesday, August 16, 2011

Automatically weed the celebrity gossip out of your TV time

From Hack-a-Day:



[Matt Richardson] came up with a doozy of an idea: using an Arduino to monitor the closed caption on TV and mute it when news about ridiculous celebrities is on-screen.
He’s using the video experimenter shield to monitor the captions. This shield connects via composite video, and can be used to decode the binary code that carries the captions in the overscan at the top of the screen. When a keyword comes through, an IR LED sends the mute command to the television, then waits until 30 seconds have gone by since the last keyword before un-muting. It’s like a troll-sniffing rat for your television! Now we just need to figure out how to use it to mute during commercials too.
[Matt] suggests we should imagine all of the cool stuff we could do with access to the closed caption data; we were already deep in thought by the time he got around to the suggestion. This would be a fantastic prank in a location were the television sound is not being used. You could put the Arduino inline with the video feed, then program it to wait for keywords in the news report and alter them in funny ways… like a live mad lib.
You can see [Matt's] video explanation of the project after the break.

Sunday, July 17, 2011

Arduino video sampler

From http://hackaday.com/2011/07/15/arduino-video-sampler/


GVS1b 1.5 bit video sampler from Gijs on Vimeo.


[gijs] sent in an Arduino video sampler he’s been working on. The sampler is able to capture, pause and play a short video forwards and backwards.
The video capture circuit is based on the Nootropic Design video experimenter. We’ve seen a few project use this video experimenter board, but never with such smooth video. The sampler samples frames at a resolution of 128×96 and stores everything in a 256Kbit SRAM. A back-of-the-envelope calculation tells us that the sampler can hold a little under a second of video, more than enough to do something cool.
[gijs] says there is a 1 bit version and a 1.5 bit version of his video sampler. While we’re busy wrapping our minds around what half a bit is, he’ll be upgrading the 1.5 bit version to 2 bits. He’s also ordered some PCBs and expects to have a kit out by October. Check out a demo after the break.

Tuesday, May 17, 2011

Video Experimenters board

Make: Online | Toolbox Review: Video Experimenter Shield

With high-definition television becoming increasingly widespread, many people are tossing their old NTSC or PAL video equipment to the curb. But as makers, we can reclaim this old equipment for our own projects. Enter The Video Experimenter. This Arduino shield by Nootropic Design lets you program your Arduino microcontroller to manipulate and analyze NTSC or PAL video signals from a composite video source. You can also decode closed caption text, which is transmitted within the video image.